Pitching and striking the tent

This tent has a classic dome structure.

All you have to do is fit the tent poles with the bedroom, and then fit the flysheet on top.

To strike the tent, the process is the same, but in reverse.

If it is windy it is advisable to attach the guy ropes that are provided in the tent bag.

Mattress compatibility

Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.

We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.

Indeed, this greatly reduces the volume inside the tent and increases condensation inside.

Ventilation of the tent

So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 1 air vent at the top.

Waterproofing of the tent

All our tents are validated in the laboratory and in the field to guarantee the waterproofing.

To do this, we put the entire tent under a 200 L/h shower for 3 hours.

The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.

Wind resistance

We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around the tent should remain habitable with a wind speed measured at 40 km/h near the ground (Force 5).

What does my product contain?

- 1 bedroom

- 1 waterproof flysheet

- 2 poles

- 12 tent pegs

- 4 guy ropes

- 1 cover

Warranty of your tent

This camping tent was designed for occasional outdoor use (4 weeks per year) during your camping trips or in the countryside.

Continuous exposure to UV light over a period of several weeks can damage its textile part.

Our tents do not belong to the category of "garden furniture" and are not designed to be kept outdoors permanently.

To maximise the lifetime of your tent, it's important to store it properly when it is not being used.

3-year guarantee.

Don't throw away, repair!

Our tents are great for camping at night.

Over time, they age and some parts may wear out or break.

To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced.

Don't throw away, repair!

Product design: our expertise

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.

This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.

A significant advantage for designing high-quality products and giving you access to all our expertise.